Products



Optimal Adhesion For Any Products Made From Any Material
 
You're tasked with improving your product or process. We can help. Adhesives are used to bond substrates via adhesion (surface bonding) and cohesion (internal strength). Henkel adhesives—from instant adhesives to pressure sensitive tape adhesives, structural adhesives to threadlocker adhesives—deliver optimal performance, convenience, and reliability—no matter your challenge.
 
Our team can recommend the perfect adhesive that meets your requirements for strength, flexibility, environmental conditions, viscosity, sustainability and more. And, thanks to our global presence, you will receive a consistent, quality product no matter where you are in the world.
 
Optimize Your Manufacturing Process and Design Options Using Adhesives
 
Since bonding was first established as an industrial joining method alongside other techniques like welding, soldering, and riveting, much research, development and engineering work has been carried out to create the best adhesive solutions.
 
Using adhesives as an alternative to mechanical fastening, welding, and other joining methods can help your business achieve a competitive advantage. If you’re looking to reduce overall manufacturing costs, increase product reliability, or performance and operating life, then it’s time for you to integrate adhesives into your design, manufacturing, and assembly process.
 
LOCTITE® Adhesives Meet Every Challenge
 
LOCTITE brand industrial adhesives are designed to aid in the manufacture of components and materials. These innovative adhesive products are formulated to withstand severe impact and peel forces, provide high sheer strength, and offer excellent chemical and temperature resistance.


Loctite 243

Loctite SF 7063

Loctite 515

Loctite SF 7452

RM 84.00Add to CartRM 122.00Out of StockRM 94.00Out of Stock

TECHNOMELT Solutions for Modern PCB and Circuitry Protection
TECHNOMELT Low Pressure Molding solutions are the benchmark for modern PCB and
circuitry protection. The simplicity of these products is their advantage: because the entire
TECHNOMELT operation takes place at low pressure, cycle time is short and fine or fragile
circuitry is not damaged. See how beneficial TECHNOMELT can be as an alternative for your
potting and encapsulating processes.

Henkel’s Low Pressure Molding materials deliver exceptional electrical insulation and excellent temperature,vibration and solvent resistance for many applications. The TECHNOMELT
product range protects electronics from the harshest environmental conditions, including high
humidity, long-term UV exposure and extreme thermal cycling.

Low Pressure Molding Technology

Low pressure molding is a faster and more efficient process than conventional potting.
TECHNOMELT is a one-part material that requires no mixing or curing; reduces material
consumption through streamlined, multi-level, contour-exact encapsulation; and offers a
sustainable solution through its unique re-usable formulation and green chemistry. Integrating TECHNOMELT as an alternative to potting also reduces part numbers by eliminating the
need for a housing or additional parts to achieve strain relief.

The Benefits

Henkel's TECHNOMELT product range has many beneficial aspects for your manufacturing:

 
  • Fewer process steps
  • Reduced equipment and operations footprint
  • Faster cycle time per part
  • Fewer machines and manufacturing lines
  • Low-viscosity materials allow for low injection pressures

  • The Process
  • Illustration of low pressure molding
  •  
  • How does low pressure molding with TECHNOMELT work? It's really simple, because you are able to encapsulate your electronic products in only three steps:
  •  
  • 1.Insert bare electronics into your predesigned mold set
  • 2.TECHNOMELT encapsulates electronics at low pressure and temperatures
  • 3.Test parts and move them to final assembly — immediately after molding




Technomelt Materials

   
   



Sustainable Pre-Applied Solutions for Threaded Parts
We provide pre-assembly coating on screws for the purpose of anti-self-loosening.
"Pre-applied" is a coating applied to threaded screws, bolts and pipe fittings which
is a dry-to-thouch thread locker or thread sealer.

Sustainable Pre-Applied Solutions for Threaded Parts

   
   


https://www.youtube.com/watch?v=mJd6FW6vhdE&t=23s

When accuracy, speed and precision are demanded, manufacturers worldwide rely on Henkel’s
complete line of LOCTITE® adhesive dispensers and light curing equipment to enable them to
transition towards a more automated, integrated and effective manufacturing process. Across pneumatic,
volumetric and glue dispenser equipment,make sure it’s a LOCTITE®.


LOCTITE Pro Pump Hand Held Dispenser

50 ml Dual Cartridge Manual Applicator-98472

Digital Syringe Dispenser

EQ PU20 Digital Peristaltic Dispenser

Our high-precision stainless steel, tapered polyethylene and flexible polypropylene dispensing needles/ dispensing tips all feature a positive locking, helical thread design to ensure the tip will stay intact during the toughest applications.


21G 1/2" Stainless Steel Dispense Tip

20G 1" Stainless Steel Dispense Tip

23G 1.5" Stainless Steel Dispense Tip

16G 1 1/4" PP Tapered Tip

RM 90.00Add to CartRM 120.00Add to CartRM 135.00Add to CartRM 90.00Add to Cart


With a full range of Loctite® branded custom designed vacuum impregnation process equipment,
a variety of sealant products and comprehensive technical support, Henkel can meet every sealing need.
With an unmatched portfolio of LOCTITE products and our fully automated vacuum impregnation system, we can ensure that you no longer face the negative effects of porosities, such as cost of scrapping, loss of production, dissatisfied customers or even lost business. Our state-of-the-art impregnation technology gives you a permanent and reliable sealing solution to the problems of porosities and leakages.

-Impregnation process can effectively seal the pores of the parts.
-It provide the most reliable approach to solving porosity issue.





Impregnation Process

   
   

Corrugated Partition

Printed or Plain Corrugated Box

  
  


FESTO is a leading world-wide supplier of automation technology and the performance leader
in industrial training and education programs.
Our aim: maximised productivity and competitiveness for our customers.




Tubing

Pressure Regulator LR-1/4-D-O-MINI

Valves

Festo Standards Based Cylinder DSNU-25-125-PPV-A

RM 222.45Out of StockRM 340.00Add to Cart

Thermal management materials are a range of different product types designed to effectively dissipate heat in electronic applications. They are composite systems that enable efficient heat transfer within components.

These solutions perform various functions within components. This includes carrying heat away from the components that generate it (also known as dissipating heat), offering stress relief from thermal cycling, providing electrical insulation, filling gaps, and offering long-term stability within components. 

Thermal management materials have an important role to play as electronic devices become increasingly powerful and generate more heat. Without effective thermal management, manufacturers can face: 

  • - System reliability drops
  • - Product performance failure
  • - Limited design advancement potential
  • - Degradation over time
  •  

Thermal management materials from Henkel are designed to fit a wide range of applications. But depending on what you’re manufacturing, the type of interface material you need will differ. Selecting the right thermal management solution is key to: 
  • Optimizing heat dissipation
  • Extending the life of components
  • Upholding performance of devices
  • Eliminating the risk of failure and performance drops

Selecting the right thermal management material for your application depends on several factors, including: 

  • Heat dissipation requirements
  • Adhesive qualities needed in assembly
  • Whether a solid or liquid is more applicable
  • The size of the gap that needs to be filled
  • Gap topography and surface
  • Component stress level requirements
  • Physics, including application temperature and structure

Knowing the requirements in your application for each of the above can help you decide whether you need a resin, liquid, or solid-state thermal management solution and whether pads, liquids, adhesives, tapes, or films are the right thermal product for use in your assembly.

For more information on how to select the right thermal interface materials, check out our guide on selecting the right thermal material for your needs.

Bergquist Gap Filler TGF 3600(3500S35) 50cc

   
RM 250.00Add to Cart   

Automatic Tape Dispenser M-1000

Solvent Type Ink

3MPrimer 94

Cleanroom Ultracel Low Lint Wipers

RM 900.00Add to CartRM 125.00Add to CartRM 150.00Add to Cart

Kindly reminder : Please make sure that you have read our terms and policies before you make any purchase. For more information, please click here.

You have 0 items in you cart. Would you like to checkout now?
0 items
Switch to Mobile Version
Subscribe Newsletter
1
Hello! Thanks for visiting my site. Please press Start button to Contact with Admin :)

Start