31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
+607-8616871
+607-8614278
AUZANA
- Industrial Adhesive
- Technomelt- Low Pressure Molding
- Pre-Applied Process (Coating)
- Loctite Equipment
- Dispense Accessories
- Impregnation Process (Porosity Sealing)
- Corrugated Packaging Products
- Automation
- Henkel Bergquist Thermal Management Materials
- Other Products
Auzana Group
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
31 & 41, Jalan Cemerlang,
Taman Perindustrian Cemerlang,
81800 Ulu Tiram,
Johor Darul Takzim, Malaysia.
Loctite HY 4090
| Previous | 19 / 30 | Next |
SKU: 2113520
80 g
Loctite 4090
Loctite HY4090 50gm Dual Cartridge, IDH:2113520
LOCTITE HY 4090 is an off-white to light yellow, high viscosity, 2-part hybrid, universal structural bonder with high humidity and vibration resistance.
LOCTITE HY 4090 is an off-white to light yellow, high viscosity, 2-part hybrid, universal structural bonder with high humidity and vibration resistance.
LOCTITE® HY 4090 is a high viscosity, off-white to light yellow gel. It opens completely new application areas in structural bonding – for the very first time combining instant adhesive properties with those for epoxies to give more striking benefits. Fixture time of 90 - 180 seconds and suitable for gaps up to 5 mm. Resistant to vibration, shock loads and impacts with the ability to bond dissimilar substrates. Best application results are achieved with LOCTITE® 50 ml Adhesive Mixing Nozzle (item 1826921), LOCTITE® 400 ml Adhesive Mixing Nozzle (item 1573135), LOCTITE® 96001 (item 267452) or LOCTITE® 983439 (item 218311).
- High moisture resistance
- Vibration, shock loads and impact resistance
- Temperature resistance up to 150 °C
- Gap filling up to 5mm
- UV resistant allowing outdoor applications
Technical Information
| Application Method | Dispense Gun |
| Applications | Bonding Plastic, Bonding Rubber, Construction, Direct Bonding, Edge Bonding, Exterior Repairs, Interior Repairs, Structural Bonding |
| Color | White: Off White, Yellow: Light Yellow |
| Cure Type | Room Temperature (Ambient) Cure, Two Component Mix |
| Fixture Time | 180 sec. |
| Fixture Time Temperature | 180 °C |
| Full Cure Time | 168 hr. |
| Gap Fill | 5 mm |
| Key Characteristics | Viscosity: High Viscosity |
| Mix Ratio | 1:1 (by weight) |
| Number of Components | 2 Part |
| Physical Form | Gel |
| Shear Strength Unit, Aluminum | psi |
| Shear Strength Unit, Etched Aluminum | psi |
| Shear Strength Unit, Grit Blasted Steel | psi |
| Shear Strength, Aluminum | 1100 |
| Shear Strength, Etched Aluminum | 1900 |
| Shear Strength, Grit Blasted Steel | 2420 |
| Substrates | Composite, Composite: Advanced Composites, Dry Surface, Elastomer: Highly Filled Elastomer, Epoxy, Fiberboard, Gel Coat, Laminate, Metal, Non-Gel Coat, Painted Surface, Phenolic, Plastic, Rubber, Thermoplastic, Thermoset, Urethane: Cast Urethane, Vinyl, Wood |